sensor solutions /// stator rtd 10//2015 page 1 specifications ? variety of configurations ? single and dual elements ? custom designs available with: ? specific dimensions ? side exit ? paddle style ? high accuracy ? special cable or leadwires the stator rtd sensor is a rectangular, flat, laminated sensors commonly called stator sticks because they are inserted between th e coils in the stator of a motor. these averaging type sensors are u sed in electric motors and generators for continuous sensing of t he temperature and provide for consistent thermal monitoring without fal se alarms. many sizes are in stock or we can customize for your application. measurement specialties stator rtd sensors are bui lt to meet the specifications of ansi c50. 10 -1990, general requirements for synchronous motors. we can build to your specifications! features ? rear exit, epoxy glass laminated ? elements, single and dual: ? platinum, copper, nickel ? custom body thickness: .030 to .375 ? standard: .030, .050, .078, .093, .125 ? custom body widths: .250 to 2.50 ? standard: .260, .305, .344, .455, .500, .625 ? leadwire/cable options stator rtd temperature sensor
stator rtd temperature sensor sensor solutions /// stator rtd 10/2015 page 2 applications ? electric motors ? generators performance specifications dielectric strength: class f: 3,000 volts rms @ 60 hz for 1 minute, between leads and external body surface class h: 2,000 volts rms @ 60 hz for 1 minute, between leads and external body surface temperature limits: class f: 155c (311f) class h: 180c (356f) rtd leadwires: two wire, three wire or four wire standard: stranded copper plated wire with ptfe insulation other leadwire coverings available dimensions
stator rtd temperature sensor sensor solutions /// stator rtd 10/2015 page 3 ordering information stator rtd sensor, rear exit model classification temperature limit material dielectric strength 300f 300h class f class h 155c 180c epoxy glass epoxy glass 3,000 volts 2,000 volts model element accuracy temperature coefficient p2b p2c p2d g2c c1d n3c platinum platinum platinum platinum copper nickel 100 ohm .12% at 0c 100 ohm .5% at 0c 100 ohm .2% at 0c 100 ohm .5% at 0c 10 ohm .2% at 25c 120 ohm .5% at 0c .00385 .00385 .00385 .00392 .00427 .00672 model 'l' body length ---- define 'l' length in inches example: 10.00 = 10.00; 6.25 = 6.25 model leadwires, element configuration color code 2s 3s 4s 3d two wire, single three wire, single four wire, single three wire, dual red/white red/white/white red/red/white/white red/white/white // blue/yellow/yellow model 't' body thickness standard leadwires a b c d e f g h .030" .050" .078" .093" .125" .093" .125" .030 30 awg 26 awg 22 awg 22 awg 22 awg 22 awg, jacketed cable 22 awg, jacketed cable 26 awg (0.050 thick at lead exit) model 'y' leadwire/cable options ---- define 'y' length in inches (120 = 120.0") model 'w' body width a b c d e f .260" (single element only) .305" (single element only) .344" (single element only) .455" (single element only) .500" .625" stocked part numbers* part number model number r-1630 r-2428 r-10224- 16 R-10494-3 r-12269-6 r-12269-8 320m c1d 3s 36 a 1 320m p2c 3s 96 a 1 320m p2c 3s 180 a 1 320m c1d 3s 96 a 1 322m g2c 3s 96 a 1 322m p2c 3s 96 a 1 * please consult factory for availability. te.com/sensorsolutions measurement specialties, inc., a te connectivity company. measurement specialties, te connectivity, te connectivity (logo) and every connection counts are trademarks. all other logos, products and /or company names referred to herein might be trademarks of their respective owners. the information given herein, including drawings, illustrations an d schematics which are intended for illustration purposes only, is believe d to be reliable. however, te connectivity makes no warranties as to its accuracy or completeness and disclaims a ny liability in connection with its use. te connectivitys obligation s shall only be as set forth in te connectivitys standard terms and conditions of sale for this product and in no cas e will te connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use o r misuse of the product. users of te connectivity products should make their own eva luation to determine the suitability of each such product for the specif ic application. ? 2015 te connectivity ltd. family of companies all rights reserved. north america measurement specialties, inc., a te connectivity company 1711 139th lane nw andover, mn 55304 tel +1 763 689 4870 fax +1 763 689 5033 temp.eng.us@meas-spec.com europe measurement specialties (europe), ltd., a te connectivity company 4 rue gaye marie 31027 toulouse, france tel +33 (0) 582 082 200 fax +33 (0) 582 082 151 asia measurement specialties (china), ltd., a te connectivity company no. 26 langshan road shenzhen high-tech park (north) nanshan district, shenzhen 518057 china tel +86 755 3330 5088 fax +86 755 3330 5099
|
